Outdoor Floodlight. With a build in Z-wave sensor. The LED light only uses 15W and produces more than 1100 lumen. Inclusion is a bit of a thing. Put the controller in include modus and then turn the reset/set button from 0-set-0 within 5 seconds. Then WAIT! Whitin a few seconds the inclusion will start.
Add to the FIBARO Home Center 2
178.0 is not a switch but the motion sensor! (178.2 is the motion detector but it is not used). 178.0.1 is the set lux value at which the light turns on (adjustable via the turning wheel) 178.2 is the LED lamp, with this you turn on the lamp 178.3 is probably the power consumption of an externally connected device (not 100% certain) 178.1.1 is the measured light value outside