• Professional advice
  • Order before 16.30 uur shipped today
  • Almost always available (+31 73 762 0 762)
  • Monday open late

Dimmer 250W Z-Wave Plus V2 FIBARO

Z-wave Plus
2wire
Best Choice

FIBARO

Dimmer 250W Z-Wave Plus V2 FIBARO

SKU: FIB_FGD-212

In stockBefore 16.30 ordered, delivered tomorow!

Smartdimmer with wireless Z-wave chip for remote control or automatic control via scene. Works with all types of dimmable lights. Place the module in the walloutlet behind the switch. We would use a momentary button. Our #1 dimmer. This is what you can do with the smart dimmer. Logged-in customers will benefit.

 

€59.95

pros

  • Also works without blue wire
  • Works with any type of switch
  • Suitable for LED lamps
  • Works also stand alone with pushbutton
  • Firmware update via Home Center is possible
  • 2nd switch input for additional options
  • Scene activation possible

cons

  • Dimmer bypass may be required at low wattage
  • Firmware updates only via HomeCenter
  • Slightly thicker than Qubino dimmer

Specifications

EAN5902020528524
Dimensions (HxWxD)42.5 x 38.25 x 20.3 mm
ConditionNew
protocolZ-wave Plus
VersionBuild-in, DIN-rail
Number of switches1
DimmableYes
IP klasseIP20
Compatible met HC LiteYes
Compatible met HC2Yes
Compatible with HomeyYes
Compatible met ZipaboxYes
Compatible with ZipatileYes
Compatible with HomeKitNo
Compatible met DomoticzYes
Compatible met HomeseerYes
Compatible met BeNextYes
Compatible with TahomaYes
Compatible met Vera Lite/3/EdgeYes

Our expert advises

Rob

Dimmer with great potential. Integration with FIBARO Home Center is perfect, but works with most populair controllers. Our no.1 dimmer. Works with momentary and bi-stable switches (then dimming only via interface or app).

Rob

Why ROBBshop?

  • 14 day return policy
  • Reach us 24/7
  • Ordered before 16:30 shipped today
  • Over 2000 positive reviews
  • Standard 2 year warranty
  • Call us at +31737620762

Product information

FIBARO Dimmer 2 | The smartest dimmer

 

De FIBARO dimmer V2 summary

 What is it? - A smart dimmer that fits behind an excisting switch for automatic control of your lights. Or control it via an app
 What can you do with it?

 - Dim all dimmable lights
 - Check the powerconsumption
 - Start smart scenes to make things happen automaticly
 - Connect a switch wireless to a light in another place without a black wire
 - Turn of all you lights with 1 button of use it for home-simulation

 What do you need?

 

 - A Z-wave controller.
 - A pushbutton when you want to dimm the lights via the switch itself
 - A patress box of 50 mm deep
 - Small wire connectors

Difficulty -  4/5 
Installation tips - Old fashioned dimmers are not usable
 - Use a dimmer bypass if the light will not turn of completely
 - Get a discount when you create an account

 - All different FIBARO modules are found here

 

The FIBARO dimmer V2  works with most types of light sources . The Z-Wave dimmer can be connected to 2 -wire or 3 wire system The dimmer can be the connected source switching and dimming , either through a Z-Wave controller or directly via the connected ( pulse ) wall switch . The dimmer automatically recognizes the connected device has an automatic overload protection , shutdown and soft start function . In the case of an old type of fluorescent light or older types of transformers , only the on / off function , it should then be set up through your  Z-Wave gateway by some parameters.

You can also use a normal switch ( bistable switch) , only you can not use the dimmer on the switch (only through the app or through your browser ) . A pulse switch does have the ability to switch and dim . 

 Video : install the FIBARO dimmer 2 module without N-wire

 Video : install the FIBARO dimmer 2 module with N-wire 

 

Using the FIBARO dimmer 2 as range tester.

 

 

Parameters setting :

The FIBARO Dimmer 2 has many advanced configuration options, the most useful of them are listed and described below:

1. Minimum brightness level
Available settings: 1 – 98
Default setting: 1

2. Maximum brightness level
Available settings: 2 – 99
Default setting: 99

NOTE:
These parameters are set automatically during the calibration process but may be adjusted manually after the calibration.
The maximum level (parameter 2) must be greater than the minimum level (parameter 1).

13. Force auto-calibration
Changing value of this parameter will force the calibration process. During the calibration parameter is set to 1 or 2 and switched to 0 upon completion.
Available settings:
0 – readout
1 – force auto-calibration of the load without FIBARO Bypass
2 – force auto-calibration of the load with FIBARO Bypass
Default setting: 
0

19. Forced switch on brightness level
If the parameter is active, switching on the Dimmer (S1 single click) will always set this brightness level.
Available settings:
0 – function disabled
1-99 – percentage level of brightness
Default setting: 0

20. Switch type
Choose between momentary switch, toggle switch and roller blind switch.
Available settings:
0 – momentary switch
1 – toggle switch
2 – Roller blind switch – two switches operate the Dimmer (S1 to brighten, S2 to dim)
Default setting: 0

26. The function of 3-way switch
Switch no. 2 controls the Dimmer additionally (in 3-way switch mode). Function disabled for parameter 20 set to 2 (roller blind switch).
Available settings:
0 – 3-way switch function for S2 disabled
1 – 3-way switch function for S2 enabled
Default setting: 0

29. Switch functionality of S1 and S2
Available settings:
0 – standard mode
1 – S1 operates as S2, S2 operates as S1
Default setting: 0

32. On/Off mode
This mode is necessary while connecting non-dimmable light sources. Setting this parameter to 1 automatically ignores brightening/dimming time settings. Forced auto calibration will set this parameter’s value to 2.
Available settings:
0 – on/off mode disabled (dimming is possible)
1 – on/off mode enabled (dimming is not possible)
2 – mode selected automatically
Default setting: 2

34. Soft-Start functionality
Time required to warm up the filament of halogen bulb.
Available settings:
0 – no soft-start
1 – short soft-start (0,1s)
2 – long soft-start (0,5s)
Default setting: 1

 

(1)  2 wire system vs 3 wire system.

A 2 wire system doesnt need a neutral wire in the patress box, whereas a 3-wire system does need a blue wire (to power the module itself). A z-wave switch normaly needs a 3-wire setup, wereas a z-wave dimmer doenst need a blue wire, and therefore a dimmer is a 2-wire system.

Read moreRead less

Bundles

  • 1x
    1x
    20% discount on accessories

    Dimmer 250W Z-Wave Plus V2 FIBARO en Dubbele Busch&Jaeger Pulsdrukker

    From €79.45 for €75.55

    €3.90 discount
  • 1x
    1x
    20% discount on accessories

    Dimmer 250W Z-Wave Plus V2 FIBARO en Dubbele GIRA Pulsdrukker

    From €81.90 for €77.51

    €4.39 discount
  • 1x
    1x
    39% discount on accessories

    Dimmer 250W Z-Wave Plus V2 FIBARO met kleine lasdoppen

    From €68.94 for €64.94

    €3.00 discount

Reviews

  • Compatibility
    Quality
    Easy to install

    goede dimmer

    Review by J.R. Dijkstra / (Posted on 18/04/2016) Zeer fijne dimmer. Bijgevoegde handleiding is wat summier, maar met de fibaro HC2 zie je wat alle variabelen doen. Is dikker dan de dimmer 1, maar dat leverde in mijn installatie geen problemen op. Deze dimmer stelt zichzelf in op de lamp die eraan hangt, en werkt dus met led, tl, gloeilamp, spaarlamp etc. Voor deze dimmers speciaal de Jung 531-41u , een impulsdrukker met twee maakkontakten aangeschaft. Met deze impulsdrukker klik je bovenaan aan/dimmen naar aan, en onder uit/dimmen naar uit. Parameter 20 op 2 (roller/shutter) en klaar.
Write a review

Write Your Own Review

You're reviewing: Dimmer 250W Z-Wave Plus V2 FIBARO

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Quality
Easy to install
Compatibility

I'm convinced

Dimmer 250W Z-Wave Plus V2 FIBARO

FIBARO

Dimmer 250W Z-Wave Plus V2 FIBARO

€59.95
 
Customer Service Phone

+31737620762
mon-fri: 10am-5pm and sat 10am-3pm

 
Adress

Gerstakker 16 5236 VG Empel Netherlands

Google maps