• Professional advice
  • Order before 23.59 uur shipped today
  • Almost always available (+31 73 762 0 762)
  • Monday open late

Multisensor 4in1 AEONLABS EOL

Z-wave Plus

Aeon Labs

Multisensor 4in1 AEONLABS EOL

SKU: AEOEZW074

Be the first to review this product

Out of stock

The Aeon Labs Multi Sensor is a USB or battery-powered Z-Wave sensor.

  • Motion Sensor
  • Temperature Sensor
  • Humidity Sensor
  • Lighting Sensor
€61.95

Specifications

EAN1220000012684
ConditionNew
protocolZ-wave Plus
CapabilitiesMulti sensor, Motion, Temperature, Humidity, Lightvalue
Power/BatteryAAA battery
PowerUSB AC/DC adapter / 4 x AA batterijen
IP klasseIP44
Extra infovoorzien van de zwave plus chip, geschikt voor buitengebruik.
Compatible with HC2Yes
Compatible with HC LiteYes
Compatible with HomeyYes
Compatible with Vera Lite/3/EdgeYes
Compatible met ZipaboxYes
Compatible with DomoticzYes
Compatible with HomeseerYes

Our expert advises

Luuk
Fraai vormgegeven multisensor van AeonLabs. Kan ook met USB gevoed worden.

Luuk

Why ROBBshop?

  • 14 day return policy
  • Reach us 24/7
  • Ordered before 23:59 shipped today
  • Over 2500 positive reviews
  • Standard 2 year warranty
  • Call us at +31737620762

Product information

The Aeon Labs Multi Sensor (AEO_MULTISENS) is a USB or battery-powered Z-Wave motion sensor, temperature sensor, humidity sensor and lighting sensor in one package. The sensor will send radio signals up to 6 associated Z- Wave devices within its own Z-Wave network when the sensor detects IR changes in front of its viewing window.

To make this work with the Vera system, please update your software (at your own risk):

 

- from your dashboard, please go to "SETUP"->"Firmware"
- in the box "Advanced: URL for Vera custom firmware:", please copy and paste this link:
http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui5-1.5.459-en-mios.squashfs
- press "download"; - choose the option "Keep my current settings and configuration" and then click on the "Start Upgrade". - wait up to 15 minutes to finish the upgrade process.

 

Configuration

When configuring the MultiSensor, you should bare in mind the following points:

Only change parameters settings on the parent device

This z-wave multisensor acts as the parent device - all configuration changes are made in the parent device.

Important - Dont make changes to the other icons (humidity,light,temperatur=e) as this will result in an error message for that sensor icon (for MiCasaVerde Vera)

 

Wake-up the MultiSensor if Battery Powered

If the z-wave MultiSensor is being powered from batteries then it will spend most of its time asleep. Like all battery-powered devices it must be awake to accept new configuration settings.

Parameter Settings

After being included, the MultiSensor needs a few parameters changing. These suggested parameters can be changed to suit your set up.

Settings Tab

  • Wakeup Interval (seconds) - 720
  • Poll this node at most once every - 360
  • Important - the Poll Interval MUST be smaller than the Wakeup Interval and non-zero

Device Options Tab

Unusually for VERA, all the common parameters are already populated in the 'Device Options' tab.

  • 2 - Wake on battery insert - 1 (default)
  • 3 - Motion Timeout - 240 (default) - length of time before motion sensor changes it's state to No Motion
  • 4 - PIR enabled - 1 (default)
  • 5 - PIR Command - 2 - Basic or Enhanced Z-Wave command sets, use 1 for directly association the MultiSensor to another device
  • 111- 720 (default) - time between temperature reports
  • 112- 720 (default) - time between light level reports
  • 113- 720 (default) - time between humidity reports
  • Note - parameters 111, 112, & 113 are set in VERA to 720 as default, you should not need to be change these, especially if powered by batteries

USB Powered Settings

The above settings are designed to conserve battery power, by keeping the MultiSensor asleep for as long as possible and only sending temperature, humidity and light reports every 12 minutes (720 seconds).

If you're using USB power you can change these settings to increase the report frequency to as often as you like.

A useful parameter to change when using USB power is 101, which controls the time interval at which updates are sent.

It's a binary combination number made up of the sum of the values for the individual sensors and battery. Each sensor has its own value:

  • Temperature - 32
  • Humidity - 64
  • Light Level - 128
  • Battery - 1

When u want all sensors to update their status regurlarly then set parameter 101 to 225 (32 + 64 + 128 + 1).

 

 

 

Link naar de forumdiscussie

Read moreRead less

Reviews

Write Your Own Review

You're reviewing: Multisensor 4in1 AEONLABS EOL

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Easy to install
Compatibility
Quality

I'm convinced

Multisensor 4in1 AEONLABS EOL

Aeon Labs

Multisensor 4in1 AEONLABS EOL

Be the first to review this product

€61.95
 
Customer Service Phone

+31737620762
mon-fri: 10am-5pm and sat 10am-3pm

 
Adress

Gerstakker 16 5236 VG Empel Netherlands

Google maps