DIN rail module HeatIt | 10 smart switches
Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating.
Heatit Z-Water is a module that clips right onto a DIN rail to add a variety of functions to your wireless Z-Wave network.
Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog/digital inputs, and a Z-Wave radio for interfacing to the wireless Z-Wave network. The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off control of light, control of valve actuators for an underfloor heating system, or control of other home automation systems.
Heatit Z-Water analog/digital inputs (different firmware versions) can be configured to work with different functionality and can be connected to potential free contacts, open-collector outputs, and will be able to control other Z-Wave devices; switches, dimmers, etc. Furthermore, the inputs can be used as a Scene Controller and send Central Scene notifications to the Z-Wave gateway.
It is possible to configure the level and the indication of the status indicator LED in the front of the Heatit Z-Water module.
Protocol Z-Wave Plus (Pending Certification) – 500 Series
Rated voltage 100V-240V 50/60Hz
Power consumption 0.6W standby
Fuse 3.15A Quick-Acting, UMF 250
Schurter Inc., part no.: 3405.0171.11
24V DC output Maximum 1.17A, 28W
Relay outputs Rated carry current: 5A
Max. switching voltage: 250V AC, 30V DC
Max. switching current: 5A
Max. switching power: 1,250 VA, 150W
Inputs Max. input voltage: 10V DC
Input impedance: 10 KΩ
Loop output voltage: 5V DC
Explorer frame supp. Yes
Device type Slave with routing capabilities
Generic device class Binary Switch
Specific device class Valve Open Close
Z-Wave Plus Yes
EN 50491-3: 2009
EN 60669-2: 2004